About

Focus and Scope

Tuhinga publishes original collections-based research in the natural sciences and humanities including museological research. Papers are published across a range of different disciplines to reflect the breadth and range of museum-based scholarship. These include Natural History (Biology, Palaeontology, Geology), History, Archaeology, Anthropology, Pacific Cultures, Mātauranga Māori, Arts and Visual Culture, Museology, and Education in the museum environment.
Tuhinga focuses primarily on New Zealand and the Pacific, but all contributions are welcome. If in doubt regarding the suitability of their manuscript for Tuhinga, authors are advised to contact our editorial team.

Policies

null

Open Access

Tuhinga provides open access to its content immediately upon publication under the conditions of Creative Commons Attribution License (CC BY 4.0). This license allows unrestricted use, distribution, and reproduction of Tuhinga’s articles in any medium, as long as the original author(s) and source are credited. Please be aware that a few articles might have a difference License and this will be indicated when pertinent. Please also note that the reuse or adaption of any logos, illustrations or images included in the articles outside of their context might not be covered under this licence, unless clearly marked with a Public Domain Statement or Creative Commons License. 

Te Papa recognizes that not all of the knowledge the authors are sharing with Tuhinga will be protected by New Zealand’s intellectual property laws. For the sake of clarity, Tuhinga wishes to reassure the authors that Te Papa is committed to its Mana Taonga principle with regard to the sharing of traditional knowledge.


Copyright Notice

License and Copyright Agreement

In submitting the manuscript to Tuhinga, authors certify that: 

  • They are authorized by their co-authors to enter into these arrangements. 
  • The work described has not been published before (except in the form of an abstract or as part of a published lecture, review or thesis); it is not under consideration for publication elsewhere; its publication has been approved by all author(s) and responsible authorities – tacitly or explicitly – of the institutes where the work has been carried out. 
  • They secure the right to reproduce any material that has already been published or where copyright is owned by someone else. 
  • They agree to the following license and copyright agreement:

Copyright

  • Copyright on any article is retained by the author(s) or the author's employer. Regarding copyright transfers please see below. 
  • Authors grant Te Papa Press a license to publish the article and identify itself as the original publisher. 
  • Authors grant any third party the right to use the article freely as long as its original authors and citation details are identified. 
  • The article and published supplementary material are distributed under the Creative Commons Attribution License (CC BY 4.0):

Creative Commons Attribution License (CC BY 4.0)

Anyone is free:

to Share — to copy, distribute and transmit the work 
to Remix — to adapt the work

Under the following conditions:

Attribution. The original authors must be given credit. 

  • For any reuse or distribution, it must be made clear to others what the license terms of this work are. 
  • Any of these conditions can be waived if the copyright holders give permission. 
  • Nothing in this license impairs or restricts the author's moral rights.

The full legal code of this license.

Copyright Transfers

Any usage rights are regulated through the Creative Commons License. Since Te Papa Press is using the Creative Commons Attribution License (CC BY 4.0), anyone (the author, their institution/company, the publisher and the public) is free to copy, distribute, transmit and adapt the work as long as the original author is credited (see above). Therefore, specific usage rights cannot be reserved by the author or their institution/company and the publisher cannot include a statement "all rights reserved" in any published paper.

This page was adapted from its equivalent at Copernicus Publications.

Website design and publishing framework: Copyright © Pensoft Publishers.

CLOCKSS system has permission to ingest, preserve, and serve this Archival Unit.


Privacy Statement

The personal information used on this website is to be used exclusively for the stated purposes of this journal. It will not be made available for any other purpose or to any other party.


Authorship/Contributorship

Some journals are integrated with Contributor Role Taxonomy (CRediT), in order to recognise individual author input within a publication, thereby ensuring professional and ethical conduct, while avoiding authorship disputes, gift / ghost authorship and similar pressing issues in academic publishing.

During manuscript submission, the submitting author is strongly recommended to specify a contributor role for each of co-author, i.e. Conceptualization, Methodology, Software, Validation, Formal analysis, Investigation, Resources, Data Curation, Writing - Original draft, Writing - Review and Editing, Visualization, Supervision, Project administration, Funding Acquisition (see more). For the journals that are not integrated with CRediT, the submitting author is encouraged to specify the roles as a free text. Once published the article will include the contributor role for all authors in the article metadata.


Use of AI

Authors must be transparent about the use of Artificial Intelligence tools such as ChatGPT and other large language models in the manuscript preparation, and disclose details of how the AI tool was used within the "Materials and Methods" section.


Desk Rejection

During the pre-review evaluation, Editors-in-Chief or Subject Editors check the manuscript and decide whether it enters peer review or is outright rejected. At this point, they may reject a manuscript prior to sending it out for peer review, specifying the reasons. The most common ones are non-conformity with the journal's focus, scope and policies and/or low scientific or linguistic quality.

In case the manuscript is suitable for the journal but has to be corrected technically or linguistically, it will be returned to the authors for improvement. The authors will not need to re-submit the manuscript but only to upload the corrected file(s) to their existing submission.


Peer Review

Once a manuscript has been deemed suitable for Tuhinga, it will be assigned to a Subject Editor first, who will, in turn, send it to at least two referees for independent peer review. Tuhinga adopts a single-blind peer review process, that is, the identity of the referees is hidden from the authors, but each referee knows the identity of the authors. However, referees are encouraged to disclose their identities.
After peer review is completed, the referees’ recommendations will be made available to the author(s), who will revise their paper accordingly. Authors who do not wish to comply with some or all suggestions by referees must detail their reasons in writing. The referees’ recommendations will inform the final decision of the Subject Editor or Editor-in-Chief about whether to accept a paper for publication or not.
Authors are expected to suggest potential referees, as well as disclose and explain potential conflicts of interest. 


Indexing and Archiving

The articles published in the journal are indexed by a high number of industry leading indexers and repositories. The journal content is archived in CLOCKSS, Zenodo, Portico and other international archives. The full list of indexes and archives are shown on the journal homepage.

Publication Ethics and Malpractice Statement

General

The publishing ethics and malpractice policies follow the Principles of Transparency and Best Practice in Scholarly Publishing (joint statement by COPE, DOAJ, WAME, and OASPA), the NISO Recommended Practices for the Presentation and Identification of E-Journals (PIE-J), and, where relevant, the Recommendations for the Conduct, Reporting, Editing, and Publication of Scholarly Work in Medical Journals from ICMJE.

Privacy statement

The personal information used on this website is to be used exclusively for the stated purposes of each particular journal. It will not be made available for any other purpose or to any other party. 

Open access

Pensoft and ARPHA-hosted journals adhere strictly to gold open access to accelerate the barrier-free dissemination of scientific knowledge. All published articles are made freely available to read, download, and distribute immediately upon publication, given that the original source and authors are cited (Creative Commons Attribution License (CC BY 4.0)).

Open data publishing and sharing

Pensoft and ARPHA encourage open data publication and sharing, in accordance with Panton’s Principles and FAIR Data Principles. For the domain of biodiversity-related publications Pensoft has specially developed extended Data Publishing Policies and Guidelines for Biodiversity Data. Specific data publishing guidelines are available on the journal website. 

Data can be published in various ways, such as preservation in data repositories linked to the respective article or as data files or packages supplementary to the article. Datasets should be deposited in an appropriate, trusted repository and the associated identifier (URL or DOI) of the dataset(s) must be included in the data resources section of the article. Reference(s) to datasets should also be included in the reference list of the article with DOIs (where available). Where no discipline-specific data repository exists authors should deposit their datasets in a general repository such as, for example Zenodo or others. 

Submission, peer review and editorial process

The peer review and editorial processes are facilitated through an online editorial system and a set of email notifications. Pensoft journals’ websites display stepwise description of the editorial process and list all necessary instructions and links. These links are also included in the respective email notification.

General: Publication and authorship

  • All submitted papers are subject to a rigorous peer review process by at least two international reviewers who are experts in the scientific field of the particular paper. 
  • The factors that are taken into account in review are relevance, soundness, significance, originality, readability and language. 
  • A declaration of potential Conflicts of Interest is a mandatory step in the submission process. The declaration becomes part of the article metadata and is displayed in both the PDF and HTML versions of the article.
  • The journals allow several rounds of review of a manuscript. The ultimate responsibility for editorial decisions lies with the respective Subject Editor and, in some cases, with the Editor-in-Chief. All appeals should be directed to the Editor-in-Chief, who may decide to seek advice among the Subject Editors and Reviewers.
  • The possible decisions include: (1) Accept, (2) Minor revisions, (3) Major revisions, (4) Reject, but re-submission encouraged and (5) Reject. 
  • If Authors are encouraged to revise and re-submit a submission, there is no guarantee that the revised submission will be accepted. 
  • The paper acceptance is constrained by such legal requirements as shall then be in force regarding libel, copyright infringement and plagiarism. 
  • No research can be included in more than one publication.
  • Editors-in-Chief, managing editors and their deputies are strongly recommended to limit the amount of papers co-authored by them. As a rule of thumb, research papers (co-)authored by Editors-in-Chief, managing editors and their deputies must not exceed 20% of the publications a year, with a clear task to drop this proportion below 15%. By adopting this practice, the journal is taking extra precaution to avoid endogeny and conflicts of interest, while ensuring the editorial decision-making process remains transparent and fair.
  • Editors-in-Chief, managing editors and handling editors are not allowed to handle manuscripts co-authored by them.

Responsibility of Authors

  • Authors are required to agree that their paper will be published in open access under the Creative Commons Attribution License (CC BY 4.0) license.
  • Authors must certify that their manuscripts are their original work. 
  • Authors must certify that the manuscript has not previously been published elsewhere. 
  • Authors must certify that the manuscript is not currently being considered for publication elsewhere. 
  • Authors should submit the manuscript in linguistically and grammatically correct English and formatted in accordance with the journal’s Author Guidelines.
  • Authors must participate in the peer review process. 
  • Authors are obliged to provide retractions or corrections of mistakes. 
  • All Authors mentioned are expected to have significantly contributed to the research. 
  • Authors must notify the Editors of any conflicts of interest. 
  • Authors must identify all sources used in the creation of their manuscript. 
  • Authors must report any errors they discover in their published paper to the Editors.
  • Authors should acknowledge all significant funders of the research pertaining to their article and list all relevant competing interests. 
  • Other sources of support for publications should also be clearly identified in the manuscript, usually in an acknowledgement (e.g. funding for the article processing charge; language editing or editorial assistance).
  • The corresponding author should provide the declaration of any conflicts of interest on behalf of all authors. Conflicts of interest may be associated with employment, sources of funding, personal financial interests, membership of relevant organisations or others.
  • Manuscripts in revision have to be revised and resubmitted within a reasonable time span. The authors are aware that manuscripts not revised within 100 days after the revision decision will be rejected and have, if desired by the authors, to be submitted afresh.

Responsibility of Reviewers

  • The manuscripts will be reviewed by two or three experts in order to reach first decision as soon as possible. Reviewers do not need to sign their reports but are welcome to do so. They are also asked to declare any conflicts of interests.
  • Reviewers are not expected to provide a thorough linguistic editing or copyediting of a manuscript, but to focus on its scientific quality, as well as for the overall style, which should correspond to the good practices in clear and concise academic writing. If Reviewers recognize that a manuscript requires linguistic edits, they should inform both Authors and Editor in the report.
  • Reviewers are asked to check whether the manuscript is scientifically sound and coherent, how interesting it is and whether the quality of the writing is acceptable.
  • In cases of strong disagreement between the reviews or between the Authors and Reviewers, the Editors can judge these according to their expertise or seek advice from a member of the journal's Editorial Board.
  • Reviewers are also asked to indicate which articles they consider to be especially interesting or significant. These articles may be given greater prominence and greater external publicity, including press releases addressed to science journalists and mass media.
  • During a second review round, the Reviewer may be asked by the Subject Editor to evaluate the revised version of the manuscript with regards to Reviewer’s recommendations submitted during the first review round.
  • Reviewers are asked to be polite and constructive in their reports. Reports that may be insulting or uninformative will be rescinded.
  • Reviewers are asked to start their report with a very brief summary of the reviewed paper. This will help the Editors and Authors see whether the reviewer correctly understood the paper or whether a report might be based on misunderstanding.
  • Further, Reviewers are asked to comment on originality, structure and previous research: (1) Is the paper sufficiently novel and does it contribute to a better understanding of the topic under scrutiny? Is the work rather confirmatory and repetitive? (2) Is the introduction clear and concise? Does it place the work into the context that is necessary for a reader to comprehend the aims, hypotheses tested, experimental design or methods? Are Material and Methods clearly described and sufficiently explained? Are reasons given when choosing one method over another one from a set of comparable methods? Are the results clearly but concisely described? Do they relate to the topic outlined in the introduction? Do they follow a logical sequence? Does the discussion place the paper in scientific context and go a step beyond the current scientific knowledge on the basis of the results? Are competing hypotheses or theories reasonably related to each other and properly discussed? Do conclusions seem reasonable? Is previous research adequately incorporated into the paper? Are references complete, necessary and accurate? Is there any sign that substantial parts of the paper were copies of other works?
  • Reviewers should not review manuscripts in which they have conflicts of interest resulting from competitive, collaborative, or other relationships or connections with any of the authors, companies, or institutions connected to the papers.
  • Reviewers should keep all information regarding papers confidential and treat them as privileged information. 
  • Reviewers should express their views clearly with supporting arguments. 
  • Reviewers should identify relevant published work that has not been cited by the authors.
  • Reviewers should also call to the Editors’ attention any substantial similarity or overlap between the manuscript under consideration and any other published paper of which they have personal knowledge.

Responsibility of Editors

  • Editors in Pensoft’s journals carry the main responsibility for the scientific quality of the published papers and base their decisions solely on the papers' importance, originality, clarity and relevance to publication's scope.
  • The Subject Editor takes the final decision on a manuscript’s acceptance or rejection and his/her name is listed as "Academic Editor" in the header of each article.
  • The Subject Editors are not expected to provide a thorough linguistic editing or copyediting of a manuscript, but to focus on its scientific quality, as well as the overall style, which should correspond to the good practices in clear and concise academic writing. 
  • Editors are expected to spot small errors in orthography or stylistic during the editing process and correct them.
  • Editors should always consider the needs of the Authors and the Readers when attempting to improve the publication. 
  • Editors should guarantee the quality of the papers and the integrity of the academic record. 
  • Editors should preserve the anonymity of Reviewers, unless the latter decide to disclose their identities. 
  • Editors should ensure that all research material they publish conforms to internationally accepted ethical guidelines. 
  • Editors should act if they suspect misconduct and make all reasonable attempts to obtain a resolution to the problem. 
  • Editors should not reject papers based on suspicions, they should have proof of misconduct.
  • Editors should not allow any conflicts of interest between Authors, Reviewers and Board Members.
  • Editors are allowed to publish a limited proportion of papers per year co-authored by them, after considering some extra precautions to avoid an impression of impropriety, endogeny, conflicts of interest and ensure that the editorial decision-making process is transparent and fair.
  • Editors-in-Chief, managing editors and handling editors are not allowed to handle manuscripts co-authored by them.
           

Neutrality to geopolitical disputes

General

The strict policy of Pensoft and its journals is to stay neutral to any political or territorial dispute. Authors should depoliticize their studies by avoiding provoking remarks, disputable geopolitical statements and controversial map designations; disputable territories should be referred to as well-recognised and non-controversial geographical areas. Тhe journal reserves the right to mark such areas at least as disputable at or after publication, to publish editor's notes, or to reject/retract the paper.

Authors' affiliations

Pensoft does not take decisions regarding the actual affiliations of institutions. Authors are advised to provide their affiliation as indicated on the official internet site of their institution.

Editors 

Editorial decisions should not be affected by the origins of the manuscript, including the nationality, ethnicity, political beliefs, race, or religion of the authors. Decisions to edit and publish should not be determined by the policies of governments or other agencies outside of the journal itself.

Human and animal rights

The ethical standards in medical and pharmacological studies are based on the Helsinki declaration (1964, amended in 1975, 1983, 1989, 1996, 2000 and 2013) of the World Medical Association and the Publication Ethics Policies for Medical Journals of the World Association of Medical Journals (WAME).

Authors of studies including experiments on humans or human tissues should declare in their cover letter a compliance with the ethical standards of the respective institutional or regional committee on human experimentation and attach committee’s statement and informed consent; for those researchers who do not have access to formal ethics review committees, the principles outlined in the Declaration of Helsinki should be followed and declared in the cover letter. Patients’ names, initials, or hospital numbers should not be used, not in the text nor in any illustrative material, tables of databases, unless the author presents a written permission from each patient to use his or her personal data. Photos or videos of patients should be taken after a warning and agreement of the patient or of a legal authority acting on his or her behalf.

Animal experiments require full compliance with local, national, ethical, and regulatory principles, and local licensing arrangements and respective statements of compliance (or approvals of institutional ethical committees where such exists) should be included in the article text.

Informed consent

Individual participants in studies have the right to decide what happens to the identifiable personal data gathered, to what they have said during a study or an interview, as well as to any photograph that was taken. Hence it is important that all participants gave their informed consent in writing prior to inclusion in the study. Identifying details (names, dates of birth, identity numbers and other information) of the participants that were studied should not be published in written descriptions, photographs, and genetic profiles unless the information is essential for scientific purposes and the participant (or parent or guardian if the participant is incapable) gave written informed consent for publication. Complete anonymity is difficult to achieve in some cases, and informed consent should be obtained if there is any doubt. If identifying characteristics are altered to protect anonymity, such as in genetic profiles, authors should provide assurance that alterations do not distort scientific meaning.

The following statement should be included in the article text in one of the following ways:

  • "Informed consent was obtained from all individual participants included in the study."
  • "Informed consent was obtained from all individuals for whom identifying information is included in this article." (In case some patients’ data have been published in the article or supplementary materials to it).

Gender issues

We encourage the use of gender-neutral language, such as 'chairperson' instead of 'chairman' or 'chairwomen', as well as 'they' instead of 'she/he' and 'their' instead of 'him/her' (or consider restructuring the sentence).

Conflict of interest

During the editorial process, the following relationships between editors and authors are considered conflicts of interest: Colleagues currently working in the same research group or department, recent co-authors, and doctoral students for which the editor served as committee chair. During the submission process, the authors are kindly advised to identify possible conflicts of interest with the journal editors. After manuscripts are assigned to the handling editor, individual editors are required to inform the managing editor of any possible conflicts of interest with the authors. Journal submissions are also assigned to referees to minimize conflicts of interest. After manuscripts are assigned for review, referees are asked to inform the editor of any conflicts that may exist.

Appeals and open debate

We encourage academic debate and constructive criticism. Authors are always invited to respond to any editorial correspondence before publication. Authors are not allowed to neglect unfavorable comments about their work and choose not to respond to criticisms. 

No Reviewer’s comment or published correspondence may contain a personal attack on any of the Authors. Criticism of the work is encouraged. Editors should edit (or reject) personal or offensive statements. Authors should submit their appeal on editorial decisions to the Editorial Office, addressed to the Editor-in-Chief or to the Managing Editor. Authors are discouraged from directly contacting Editorial Board Members and Editors with appeals.

Editors will mediate all discussions between Authors and Reviewers during the peer review process prior to publication. If agreement cannot be reached, Editors may consider inviting additional reviewers if appropriate. 

The Editor-in-Chief will mediate all discussions between Authors and Subject Editors.

The journals encourage publication of open opinions, forum papers, corrigenda, critical comments on a published paper and Author’s response to criticism.

Misconduct

Research misconduct may include: (a) manipulating research materials, equipment or processes; (b) changing or omitting data or results such that the research is not accurately represented in the article; c) plagiarism. Research misconduct does not include honest error or differences of opinion. If misconduct is suspected, journal Editors will act in accordance with the relevant COPE guidelines.

Plagiarism and duplicate publication policy
A special case of misconduct is plagiarism, which is the appropriation of another person's ideas, processes, results or words without giving appropriate credit. Plagiarism is considered theft of intellectual property and manuscripts submitted to this journal which contain substantial unattributed textual copying from other papers will be immediately rejected. Editors are advised to check manuscripts for plagiarism via the iThenticate service by clicking on the "ïThenticate report" button. Journal providing a peer review in languages other than English (for example, Russian) may use other plagiarism checking services (for example, Antiplagiat). 
Instances, when authors re-use large parts of their publications without providing a clear reference to the original source, are considered duplication of work. Slightly changed published works submitted in multiple journals is not acceptable practice either. In cases of plagiarism in an already published paper or duplicate publication, an announcement will be made on the journal publication page and a procedure of retraction will be triggered.

Responses to possible misconduct

All allegations of misconduct must be referred to the Editor-In-Chief. Upon the thorough examination, the Editor-In-Chief and deputy editors should conclude if the case concerns a possibility of misconduct. All allegations should be kept confidential and references to the matter in writing should be kept anonymous, whenever possible.

Should a comment on potential misconduct be submitted by the Reviewers or Editors, an explanation will be sought from the Authors. If it is satisfactory and the issue is the result of either a mistake or misunderstanding, the matter can be easily resolved. If not, the manuscript will be rejected or retracted and the Editors may impose a ban on that individual's publication in the journals for a certain period of time. In cases of published plagiarism or dual publication, an announcement will be made in both journals explaining the situation.

When allegations concern authors, the peer review and publication process for their submission will be halted until completion of the aforementioned process. The investigation will be carried out even if the authors withdraw the manuscript, and implementation of the responses below will be considered.

When allegations concern reviewers or editors, they will be replaced in the review process during the ongoing investigation of the matter. Editors or reviewers who are found to have engaged in scientific misconduct should be removed from further association with the journal, and this fact reported to their institution.

Retraction policies

Article retraction

According to the COPE Retraction Guidelines followed by this Journal, an article can be retracted because of the following reasons:

  • Unreliable findings based on clear evidence of a misconduct (e.g. fraudulent use of the data) or honest error (e.g. miscalculation or experimental error).
  • Redundant publication, e.g., findings that have previously been published elsewhere without proper cross-referencing, permission or justification.
  • Plagiarism or other kind of unethical research.

Retraction procedure

  • Retraction should happen after a careful consideration by the Journal editors of allegations coming from the editors, authors, or readers.
  • The HTML version of the retracted article is removed (except for the article metadata) and on its place a retraction note is issued.
  • The PDF of the retracted article is left on the website but clearly watermarked with the note "Retracted" on each page.
  • In some rare cases (e.g., for legal reasons or health risk) the retracted article can be replaced with a new corrected version containing apparent link to the retracted original version and a retraction note with a history of the document.

Expression of concern

In other cases, the Journal editors should consider issuing an expression of concern, if evidence is available for:

  • Inconclusive evidence of research or publication misconduct by the authors.
  • Unreliable findings that are unreliable but the authors’ institution will not investigate the case.
  • A belief that an investigation into alleged misconduct related to the publication either has not been, or would not be, fair and impartial or conclusive.
  • An investigation is underway but a judgement will not be available for a considerable time.

Errata and Corrigenda

Pensoft journals largely follow the ICMJE guidelines for corrections and errata.

Errata

Admissible and insignificant errors in a published article that do not affect the article content or scientific integrity (e.g. typographic errors, broken links, wrong page numbers in the article headers etc.) can be corrected through publishing of an erratum. This happens through replacing the original PDF with the corrected one together with a correction notice on the Erratum Tab of the HTML version of the paper, detailing the errors and the changes implemented in the original PDF. The original PDF will be marked with a correction note and an indication to the corrected version of the erratum article. The original PDF will also be archived and made accessible via a link in the same Erratum Tab.

Authors are also encouraged to post comments and indicate typographical errors on their articles to the Comments tab of the HTML version of the article.

Corrigenda

Corrigenda should be published in cases when significant errors are discovered in a published article. Usually, such errors affect the scientific integrity of the paper and could vary in scale. Reasons for publishing corrigenda may include changes in authorship, unintentional mistakes in published research findings and protocols, errors in labelling of tables and figures or others. In taxonomic journals, corrigenda are often needed in cases where the errors affect nomenclatural acts. Corrigenda are published as a separate publication and bear their own DOI. Examples of published corrigenda are available here.

The decision for issuing errata or corrigenda is with the editors after discussion with the authors.


COPE Compliance

This journal endorses the COPE (Committee on Publication Ethics) guidelines and will pursue cases of suspected research and publication misconduct (e.g. falsification, unethical experimentation, plagiarism, inappropriate image manipulation, redundant publication). For further information about COPE please see the website for COPE at http://www.publicationethics.org and journal's Publication Ethics and Malpractice Statement.

Terms of Use

This document describes the Terms of Use of the services provided by the Tuhinga journal, hereinafter referred to as "the Journal" or "this Journal". All Users agree to these Terms of Use when signing up to this Journal. Signed Journal Users will be hereinafter referred to as "User" or "Users".

The publication services to the Journal are provided by Pensoft Publishers Ltd., through its publishing platform ARPHA, hereinafter referred to as "the Provider".

The Provider reserves the right to update the Terms of Use occasionally. Users will be notified via posting on the site and/or by email. If using the services of the Journal after such notice, the User will be deemed to have accepted the proposed modifications. If the User disagrees with the modifications, he/she should stop using the Journal services. Users are advised to periodically check the Terms of Use for updates or revisions. Violation of any of the terms will result in the termination of the User's account. The Provider is not responsible for any content posted by the User in the Journal.

Account Terms

  1. For registration in this Journal or any of the services or tools hosted on it, Users must provide their full legal name, a valid email address, postal address, affiliation (if any), and any other information requested.
  2. Accounts created via this journal automatically sign in the User to the ARPHA Platform.
  3. Users are responsible for maintaining the security of their account and password. The Journal cannot and will not be liable for any loss or damage from failure to comply with this security obligation.
  4. Users are solely responsible for the content posted via the Journal services (including, but not limited to data, text, files, information, usernames, images, graphics, photos, profiles, audio and video clips, sounds, applications, links and other content) and all activities that occur under their account.
  5. Users may not use the service for any illegal or unauthorised purpose. Users must not, in the use of the service, violate any laws within their jurisdiction (including but not limited to copyright or trademark laws).
  6. Users can change or pseudonomyse their personal data, or deactivate their accounts at any time through the functionality available in the User’s personal profile. Deactivation or pseudonomysation will not affect the appearance of personal data in association with an already published work of which the User is author, co-author, editor, or reviewer.
  7. Users can report to the Journal uses of their personal data, that they might consider not corresponding to the current Terms of Use.
  8. The User’s personal data is processed by the Journal on the legal basis corresponding to Article 6, paragraph 1, letters a, b, c and f. of the General Data Protection Regulation (hereinafter referred to as GDPR) and will be used for the purpose of Journal’s services in accordance with the present Terms and Use, as well as in those cases expressly stated by the legislation.
  9. User’s consent to use the information the Journal has collected about the User corresponds to Article 6(1)(a) of the GDPR.
  10. The ‘legitimate interest’ of the Journal to engage with the User and enable him/her to participate in Journal’s activities and use Journal’s services correspond to Article 6(1)(f) of the GDPR.

Services and Prices

The Provider reserves the right to modify or discontinue, temporarily or permanently, the services provided by the Journal. Plans and prices are subject to change upon 30 days notice from the Provider. Such notice may be provided at any time by posting the changes to the relevant service website.

Ownership

The Authors retain full ownership to their content published in the Journal. We claim no intellectual property rights over the material provided by any User in this Journal. However, by setting pages to be viewed publicly (Open Access), the User agrees to allow others to view and download the relevant content. In addition, Open Access articles might be used by the Provider, or any other third party, for data mining purposes. Authors are solely responsible for the content submitted to the journal and must confirm [during the submission process] that the content does not contain any materials subject to copyright violation including, but not limited to, text, data, multimedia, images, graphics, photos, audio and video clips. This requirement holds for both the article text and any supplementary material associated with the article.

The Provider reserves the rights in its sole discretion to refuse or remove any content that is available via the Website.

Copyrighted Materials

Unless stated otherwise, the Journal website may contain some copyrighted material (for example, logos and other proprietary information, including, without limitation, text, software, photos, video, graphics, music and sound - "Copyrighted Material"). The User may not copy, modify, alter, publish, transmit, distribute, display, participate in the transfer or sale, create derivative works or, in any way, exploit any of the Copyrighted Material, in whole or in part, without written permission from the copyright owner. Users will be solely liable for any damage resulting from any infringement of copyrights, proprietary rights or any other harm resulting from such a submission.

Exceptions from this rule are e-chapters or e-articles published under Open Access (see below), which are normally published under Creative Commons Attribution 3.0 license (CC-BY), or Creative Commons Attribution 4.0 license (CC-BY), or Creative Commons Public Domain license (CC0).

Open Access Materials

This Journal is a supporter of open science. Open access to content is clearly marked, with text and/or the open access logo, on all materials published under this model. Unless otherwise stated, open access content is published in accordance with the Creative Commons Attribution 4.0 licence (CC-BY). This particular licence allows the copying, displaying and distribution of the content at no charge, provided that the author and source are credited.

Privacy Statement

  1. Users agree to submit their personal data to this Journal, hosted on the ARPHA Platform provided by Pensoft.
  2. The Journal collects personal information from Users (e.g., name, postal and email addresses, affiliation) only for the purpose of its services.
  3. All personal data will be used exclusively for the stated purposes of the website and will not be made available for any other purpose or to third parties.
  4. In the case of co-authorship of a work published through the Journal services, each of the co-authors states that they agree that their personal data be collected, stored and used by the Journal.
  5. In the case of co-authorship, each of the co-authors agrees that their personal data publicly available in the form of a co-authorship of a published work, can be distributed to external indexing services and aggregators for the purpose of the widest possible distribution of the work they co-author.
  6. When one of the co-authors is not registered in the Journal, it is presumed that the corresponding author who is registered has requested and obtained his/her consent that his/her personal data will be collected, stored and used by the Journal.
  7. The registered co-author undertakes to provide an e-mail address of the unregistered author, to whom the Journal will send a message in order to give the unregistered co-author’s explicit consent for the processing of his/her personal data by the Journal.
  8. The Journal is not responsible if the provided e-mail of the unregistered co-author is inaccurate or invalid. In such cases, it is assumed that the processing of the personal data of the unregistered co-author is done on a legal basis and with a given consent.
  9. The Journal undertakes to collect, store and use the provided personal data of third parties (including but not limited to unregistered co-authors) solely for the purposes of the website, as well as in those cases expressly stated by the legislation.
  10. Users can receive emails from Journal and its hosting platform ARPHA, provided by Pensoft, about activities they have given their consent for. Examples of such activities are:
    • Email notifications to authors, reviewers and editors who are engaged with authoring, reviewing or editing a manuscript submitted to the Journal.
    • Email alerts sent via email subscription service, which can happen only if the User has willingly subscribed for such a service. Unsubscription from the service can happen through a one-click link provided in each email alert notification.
    • Information emails on important changes in the system or in its Terms of Use which are sent via Mailchimp are provided with "Unsubscribe" function.
  11. Registered users can be invited to provide a peer review on manuscripts submitted to the Journal. In such cases, the users can decline the review invitation through a link available on the journal’s website.
  12. Each provided peer review can be registered with external services (such as Web of Science Reviewer Recognition Service, formerly Publons). The reviewer will be notified if such registration is going to occur and can decline the registration process.
  13. In case the Journal starts using personal data for purposes other than those specified in the Terms of Use, the Journal undertakes to immediately inform the person and request his/her consent.
  14. If the person does not give his/her consent to the processing of his or her personal data pursuant to the preceding paragraph, the Journal shall cease the processing of the personal data for the purposes for which there is no consent, unless there is another legal basis for the processing.
  15. Users can change/correct their personal data anytime via the functionality available in the User’s profile. Users can request the Journal to correct their personal data if the data is inaccurate or outdated and the Journal is obliged to correct the inaccurate or outdated personal data in a timely manner.
  16. Users may request the Journal to restrict the use of their personal data insofar as this limitation is not contrary to the law or the Terms of Use.
  17. Users may request their personal data to be deleted (the right to be forgotten) by the Journal, provided that the deletion does not conflict with the law or the Terms of Use.
  18. The User has the right to be informed:
    • whether his or her personal data have been processed;
    • for which purposes the Journal processes the personal data;
    • the ways in which his/her personal data are processed;
    • the types of personal data that Journal processes.
  19. The user undertakes not to interfere with and impede the Journal’s activities in the exercise of the provided rights.
  20. In case of non-fulfillment under the previous paragraph, the Journal reserves the right to delete the user's profile.

Disclaimer of Warranty and Limitation of Liability

Neither Pensoft and its affiliates nor any of their respective employees, agents, third party content providers or licensors warrant that the Journal service will be uninterrupted or error-free; nor do they give any warranty as to the results that may be obtained from use of the journal, or as to the accuracy or reliability of any information, service or merchandise provided through Journal.

Legal, medical, and health-related information located, identified or obtained through the use of the Service, is provided for informational purposes only and is not a substitute for qualified advice from a professional.

In no event will the Provider, or any person or entity involved in creating, producing or distributing Journal or the contents included therein, be liable in contract, in tort (including for its own negligence) or under any other legal theory (including strict liability) for any damages, including, but without limitation to, direct, indirect, incidental, special, punitive, consequential or similar damages, including, but without limitation to, lost profits or revenues, loss of use or similar economic loss, arising from the use of or inability to use the journal platform. The User hereby acknowledges that the provisions of this section will apply to all use of the content on Journal. Applicable law may not allow the limitation or exclusion of liability or incidental or consequential damages, so the above limitation or exclusion may not apply to the User. In no event will Pensoft’s total liability to the User for all damages, losses or causes of action, whether in contract, tort (including own negligence) or under any other legal theory (including strict liability), exceed the amount paid by the User, if any, for accessing Journal.

Third Party Content

The Provider is solely a distributor (and not a publisher) of SOME of the content supplied by third parties and Users of the Journal. Any opinions, advice, statements, services, offers, or other information or content expressed or made available by third parties, including information providers and Users, are those of the respective author(s) or distributor(s) and not of the Provider.


Cookies Policy

Cookies

a) Session cookies

We use cookies on our website. Cookies are small text files or other storage technologies stored on your computer by your browser. These cookies process certain specific information about you, such as your browser, location data, or IP address.  

This processing makes our website more user-friendly, efficient, and secure, allowing us, for example, to allow the "Remember me" function.

The legal basis for such processing is Art. 6 Para. 1 lit. b) GDPR, insofar as these cookies are used to collect data to initiate or process contractual relationships.

If the processing does not serve to initiate or process a contract, our legitimate interest lies in improving the functionality of our website. The legal basis is then Art. 6 Para. 1 lit. f) GDPR.

When you close your browser, these session cookies are deleted.

b) Disabling cookies

You can refuse the use of cookies by changing the settings on your browser. Likewise, you can use the browser to delete cookies that have already been stored. However, the steps and measures required vary, depending on the browser you use. If you have any questions, please use the help function or consult the documentation for your browser or contact its maker for support. Browser settings cannot prevent so-called flash cookies from being set. Instead, you will need to change the setting of your Flash player. The steps and measures required for this also depend on the Flash player you are using. If you have any questions, please use the help function or consult the documentation for your Flash player or contact its maker for support.

If you prevent or restrict the installation of cookies, not all of the functions on our site may be fully usable.


Instructions to Authors

Authors are advised to prepare their manuscripts closely following the instructions below to avoid delays in the editorial and peer-review process. The submission of a manuscript implies that the manuscript is original and has not been submitted or published elsewhere in its current or modified form.

The guidelines here are presented with Research articles, Review articles, and Methods articles in mind. Short communications would follow the same pattern of a Research article, though it will lack the Abstract, Keywords and internal subdivisions. Book and exhibition reviews, as well as biographies and obituaries, can have a freer form, though the latter can also be structured similarly to a Review article.


Article Types

Research article: Research articles are the main and standard output of Tuhinga, reporting the findings of original research, including case studies.

Review article: Review articles consist of a comprehensive summary of the research and literature on a given topic, presenting a current perspective and future expectations.

Methods article: The purpose of a methods article is to report new or revised methodologies for work on one of the areas covered by Tuhinga.

Short communication: This format should be used for quick communication of research results that are not suitable for an entire research article. Short communications have no Abstract and are not divided into sessions.

Book review: Reviews of scholarly books published by Te Papa Press or other books of academic importance by external publishers. Book reviews will often be invited, but feel free to contact our editorial team for proposals.

Exhibition review: Reviews of exhibitions at Te Papa or other New Zealand or Pacific museums or international exhibitions featuring New Zealand or Pacific material. Exhibition reviews will often be invited, but feel free to contact our editorial team for proposals.

Biography / Obituary: Articles focusing on the life of a relevant scholar or creator and their work.

Thematic issues
Tuhinga is open to publishing thematic issues focused on a given topic in addition to its regular issues. The editorial team will typically decide on the topic and timeframe of such publications, but authors are encouraged to get in touch with our editorial team about potential thematic issues.
 


Manuscript length and word limit

Research articles, Review articles and Methods articles: There is no word limit for these articles, but we advise contacting the editorial team beforehand regarding articles over 20 published pages (circa 10,000 words, without figures or tables).

Short communications, Book reviews, Exhibition reviews, Biographies & obituaries: These articles have a limit of 4 published pages (circa 2,000 words, without figures or tables).
 


Title Page

Title: The title should be concise and accurately reflect the content or the message of the article. It should be in sentence case; only proper nouns (including scientific names) should start with a capital letter.
For Natural History articles, higher taxa within the title should be separated with commas, e.g.: (Gastropoda, Helicidae).

Running title: A short running title (maximum 50 characters) for the pages’ header should also be provided.

Author(s) and affiliation: The full names of all authors should be provided; middle names can be abbreviated. Author affiliation should be indicated with superscript numbering. Please include the institutional affiliation (e.g., university, museum), physical address, city, state/province (if applicable), and country. We strongly encourage ORCID numbers to be provided for each author. We also support Twitter handles.
One of the authors must be designated as the corresponding author, and their email address for contact should be provided. Corresponding authors are also responsible for making sure that the author list and contributions are accurate.

Abstract: The abstract must accurately and concisely describe the study and should contain a maximum of 250 words. Literature references should not be included in the abstract. However, we encourage the inclusion of the authorship of biological taxa.
At the authors’ discretion, a translation of the abstract to a maximum of two other context-appropriate languages can be provided. In this case, the authors must also provide a translation of the title.

Keywords: A maximum of 6 key words should be given. They must differ from what is present in the title.

ZooBank registration number: If the article presents the description of new animal taxa at the species, genus, or family levels, it must be registered in ZooBank. The registration number for the article must be provided (the registration numbers for each new taxa should be included in the body of the text; see below).


Main Text

Manuscripts must be submitted in English. Both British/Commonwealth or American English can be used, provided that the choice is consistent throughout the entire manuscript. Although the quality of written English will not affect the acceptance/rejection of a manuscript, in some cases we might require that a manuscript undergo linguistic editing by a native English speaker or professional English language editor. The submission process includes an option to request a professional linguistic editing at a price of EUR 15.00 per 1800 characters that the authors can make use of; the authors are NOT obliged to use this service.

We encourage the usage of active voice and first person whenever appropriate. We discourage the use of italics, bold or underline for emphasis.

Manuscripts must be prepared using a common 12-point font, with 1.5 line spacing and page numbering. Do not use tabulation for marking paragraphs. For convenience of the referees, the lines can be numbered, though this is not mandatory.

Footnotes and endnotes: Do not use footnotes, as software may have trouble handling them. Please compile them as endnotes instead.

Italicization: Words in foreign languages (except Te Reo Māori) should be italicised the first time they appear.
The following should also be italicised: scientific names of genus and species level taxa; titles of artworks, films, plays, music albums, video games, radio/TV series, ballets, operas, exhibitions, and books; names of ships and other vessels; symbols for variables and constants (when appropriate).

Quotations: Short quotations should be embedded in the text, enclosed in double quotation marks, with indication of the page (or time frame for non-textual media) in which it appeared within the cited work. Long quotations should follow the same guidelines but must be placed on a separate line. Single quotation marks should be used for a quotation that occurs within another quotation.

En-dashes: Use an en-dash (–), not a hyphen, to link spans, such as page numbers, sizes, and dates (e.g., pp. 54–58, figs 2–4, 1939–1945).

Units: Use the International System of Units (SI). Measurements in other units (e.g., inches, feet) can be provided when context-appropriate in addition to the ones in SI units.

Geographical coordinates: Geographical coordinates must be listed in one of the following formats: Degrees, Minutes and Seconds (DMS); Degrees and Decimal Minutes (DDM); or Decimal Degrees (DD).

Headings and subheadings: The main text should be divided into sections with headings, as and when appropriate. For example, a scientific paper would include the standard headings Introduction, Material and Methods, Results, Discussion, Conclusions, Acknowledgements, Author Contributions, References. Alternative or additional headings are permissible when necessary.
Subheading can be used, down to two levels from the main headings. Do not number headings or subheadings.

Author contributions:  For all manuscripts with two or more authors, a section describing the contribution of each author is required. Identify authors by their initials. Please refer to the section ‘CRediT author statement’ below for more information on contributor roles.

Other languages: Authors may provide abstracts in other languages, as well as a translation of the title. When words in languages other than English are used extensively in the text, authors should provide a glossary describing them.

Use of Te Reo Māori: Do not italicise words in Te Reo. The Māori dictionary Te Aka is our preferred reference source for the correct use of macrons. 
 


Citations & References

References in the text to published material should be presented as: "Smith (2001) said…" or "… (Smith 2001)" or "… (Smith 2000a, 2000b; Brown & Smith 2004; Smith et al. 2010)."

Published references (articles, books, chapters, etc.) must be presented in a References list at the end of the main body of the text. It is important to format the references properly, because all references will be linked electronically as completely as possible to the papers cited. It is desirable to add a DOI (digital object identifier) number to the references when possible. 

References should be listed alphabetically by author name. If first author is the same, then by second author, etc. If all authors are the same, then by year and title. 

Please use the following style for the reference list — or download the Pensoft EndNote style here.

Journal article: Mallet J, Willmott K (2002) Taxonomy: Renaissance or Tower of Babel? Trends in Ecology and Evolution 18(2): 57–59. https://doi.org/10.1016/S0169-5347(02)00061-7 

For accepted papers, "in press" appears instead the year in parentheses.

Book: Goix N, Klimaszewski J (2007) Catalogue of Aleocharine Rove Beetles of Canada and Alaska. Pensoft Publishers, Sofia-Moscow, 166 pp.

Book chapter: Mayr E (2000) The biological species concept. In: Wheeler QD, Meier R (Eds) Species Concepts and Phylogenetic Theory: A Debate. Columbia University Press, New York, 17–29.

Conference proceedings: Orr AG (2006) Odonata in Bornean tropical rain forest formations: diversity, endemicity and applications for conservation management. In: Cordero Rivera A (Ed.) Forest and Dragonflies. Fourth WDA International Symposium of Odonatology, Pontevedra (Spain), July 2005. Pensoft Publishers, Sofia-Moscow, 51–78.

Thesis and dissertations: Dalebout ML (2002) Species identity, genetic diversity and molecular systematic relationships among the Ziphiidae (beaked whales). PhD Thesis, University of Auckland, Auckland, New Zealand.

Internet articles and websites: Turchin P (2021) The horse bit and bridle kicked off ancient empires – a new giant dataset tracks the societal factors that drove military technology. The Conversation 21/Oct/2021. Available from https://theconversation.com/the-horse-bit-and-bridle-kicked-off-ancient-empires-a-new-giant-dataset-tracks-the-societal-factors-that-drove-military-technology-170073  (date of access 01/Nov/2021).


Citations & References: Humanities

Manuscripts from the humanities can make use of endnotes for referencing specific pages within a published source, and for referencing other sources such as archive materials, newspaper articles, oral history recordings, anonymous sources, etc.

Figures

All figures should be submitted as high resolution (minimum 300 dpi) .tiff, .jpeg or .png files. The .eps, .svg and .pdf formats are also accepted for diagrams. All figures must be prepared in a manner ready for publication (i.e., we do not offer figure editing services).

Figure citations in the text should always be with Capital "F" and en-dash for ranges. One figure with a full stop, figures without. Examples: Fig. 1; Figs 1, 2; Figs 1–3; Fig. 1A, B; Fig. 2A–E. 
Citations of figures from other publications should always be lowercase (fig. / figs). 

Figure captions should be placed at the end of the manuscript, after the References.

Image copyright and costs: It is the authors’ responsibility to clear any copyright and to pay any fees for image usage/publication.


Tables

Tables should be should be referred to in the text as "Table 1" and so forth. Table captions should be placed at the end of the manuscript, after the References or Figure Captions.
Each table should be submitted as separate Word or, preferably, Excel documents or equivalent formats.

Supplementary Files

Not all information needs to be included in the main body of the text. Tuhinga accepts supplementary files in most common file extensions. These can include datasets, images, supporting tables and graphs, slideshows, code, audio, video, and software, among others. For large files (e.g., video, software), we encourage deposition in external data repositories, such as Dryad and GitHub.
Supplementary files must be cited in the main text where appropriate.


Author Contributions

The journal is integrated with Contributor Role Taxonomy (CRediT), in order to recognise individual author input within a publication, thereby ensuring professional and ethical conduct, while avoiding authorship disputes, gift / ghost authorship and similar pressing issues in academic publishing.

During manuscript submission, the submitting author is strongly recommended to select a contributor role for each of co-author, using a list of 14 predefined roles, i.e. Conceptualization, Methodology, Software, Validation, Formal analysis, Investigation, Resources, Data Curation, Writing - Original draft, Writing - Review and Editing, Visualization, Supervision, Project administration, Funding Acquisition (see more). Once published, the article will be including the contributor role for all authors in the article metadata.


Revising Your Article

Authors must submit the revised version of the manuscript using Track Changes/Comments tools of Word so that the Subject Editor can see the corrections and additions.

Authors must address all critiques of the referees in a response letter to the editor and submit it along with the revised manuscript through the online editorial system. In case a response letter is not submitted by the authors, the editor has the right to reject the manuscript without further evaluation. When resubmitting a manuscript that has been previously rejected with resubmission encouraged, authors must include the response letter to the article text file, and the pdf review version, so that it gets to the Subject Editor and the reviewers during the peer review.

Once your manuscript is accepted for publication, authors must ensure that the clean version submitted to copy and layout editing contains the full list of authors (in the correct order of appearance), as well as the Funding and/or Acknowledgement information (if any).

When submitting corrections to proofs (during the layout stage), authors must upload the latest proof (in PDF format) containing their revisions as track changes.


Natural History Articles

Codes and notations: Articles must abide by the guidelines of international commissions, their codes and standard notations, pertaining to its area of study. These include, for instance, the International Commission on Stratigraphy, the International Union of Pure and Applied Chemistry (IUPAC), the International Commission on Zoological Nomenclature (ICZN), among others.

Scientific names: Scientific names of genus and species level taxa must be italicized and the authorship for the taxon must be provided. We strongly encourage that the bibliographical reference for the authorship of species that are the focus of the study to be listed in the Reference section.
Nomenclature and nomenclatural acts must agree with the last edition of the International Code of Zoological Nomenclature and its amendment or the latest edition of the International Code of Nomenclature for algae, fungi and plants.

New animal taxa: Whenever a new genus or species level animal taxon is proposed, the name must be accompanied by its ZooBank registration number. The registration number for the article must be provided on the title page. This step can be done during the manuscript revision stage.

New fungal taxa: Whenever a new fungal taxon name is proposed, the name must be accompanied by its identifier in one of the three recognized repositories: Fungal Names, Index Fungorum, or MycoBank. This step can be done during the manuscript revision stage.

Voucher material: Authors are required to deposit type specimens and other voucher material in open natural history collections, such as museums, universities, herbaria, and other research institutions. Registration numbers should be provided. 

Genetic data: Manuscripts containing nucleotide sequences must have an International Nucleotide Sequence Databases (INSD) accession number from the GenBank Data Libraries (GenBank), European Biology Laboratory (EMBL), or DNA Data Bank of Japan (DDBJ).

Ethics of animal research: When applicable, the methodology must be in accordance with international, national and/or institutional legislation and regulations for collection and/or ethical treatment of animals. Permits should be noted.


Submission Guidelines


Submission Procedure

Already have a Username/Password?

Go to Login

Need a Username/Password?

Go to Registration

Registration and login are required to submit items online and to check the status of current submissions.

Submission of manuscripts to this journal is possible only through the online submission module. We kindly request authors to consult the Focus and Scope section prior to submission. In order to submit a manuscript to the journal, authors are required to register with the journal and/or to login. Once logged in, you will find the online submission system either by clicking the "Submit manuscript" button.

The manuscript submission process is separated into the following steps:

  • Step 1: Specifying the manuscript type and completing the submission checklist
  • Step 2: Choosing the payment option and requesting optional services
  • Step 3: Typing in the author(s) names and affiliation, title, abstract, keywords, and other metadata
  • Step 4: Assigning classifications categories for your manuscript using hierarchical classification trees
  • Step 5: Completing the submission metadata by adding details about any supporting agencies, conflict of interest, ethical statement, comments to the editors
  • Step 6: Agreeing with the journal's Data Publishing Policy and specifying the availability of the data underpinning your article
  • Step 7: Uploading the submission file and the additional files (see below for details on how to prepare it)
  • Step 8: Confirming the automatically generated pdf review version of the article, and the metadata (or revising them, if needed)
  • Step 9: Uploading supplementary files (see below for details) and associated metadata
  • Step 10: Suggesting reviewers, final verification of the submitted files and confirmation

Stepwise guidance on new manuscript submission, with screenshots of the interface embedded, is available online in this section of the User Manual.


Organizing Your Submission

Before starting your submission please make sure that your manuscript is formatted in accordance with the Author Guidelines.

Before attempting an online submission, please consider preparing the following file types:

1. Submission file

Review version of the manuscript: a TEXT (MS WORD) file in either DOC, DOCX, RTF or ODT format. The total file size must be no larger than 80 MB. The system allows two options for the submission file upload:

  • it could contain all figures embedded at their respective places within the manuscript: 

    • Advantage: The review version of the manuscript will be more convenient for reading and understanding by the reviewers and editors. Likewise, if you opt to post your manuscript on ARPHA Preprints and this is allowed by the current journal’s policies, it will be better organised for the readers.

    • Drawback: Additional effort is needed to place and number the figures within the text.

  • it could contain the article text only, while the figures are added separately in the allowed formats (see below), so that the system can add them automatically to the PDF version that will be sent for review. The authors have the option to check and replace, if needed, the PDF review version generated at the first submission step:

    • Advantage: No additional effort is needed for placing and numbering the figures within the text.

    • Drawback: All figures will be placed at the end of the manuscript and the review version will be less convenient for reading and understanding by the reviewers and editors. The same concerns your preprint if you decide to post it on ARPHA Preprints and this is allowed by the current journal’s policies.

2. Additional files

High-resolution figures must be submitted during the same submission process as the additional files (Step 7) in one of the accepted file formats (see below). These may be compressed in order to reduce bandwidth during upload:

  • Figures (each figure as an individual file in one of the following image file formats: EPS, TIFF, JPEG, PNG, GIF, BMP, not larger than 20 MB each)
  • Equations (each equation as an individual file in one of the above-mentioned image file formats)

Please note that the maximum file size that may be uploaded through our online submission system is 20 MB.

3. Supplementary files (appendices)

Large datasets or multimedia files, usually published as appendices in conventional print journals, should be uploaded as supplementary files complete with the associated metadata on the online submission form. Supplementary files should have their own legends.

Most file formats are accepted. Text-only appendices must be in DOC, DOCX, RTF, or ODF formats.

Should you have any technical problems in submitting a manuscript to this journal, please contact the Editorial Office at journals@pensoft.net.

We encourage authors to send an inquiry to the respective Subject Editor prior to submitting a manuscript. The purpose of the presubmission inquiry is to solicit rapid initial feedback on the suitability of the manuscript for publication in this journal. Pre-submission inquiries may also be sent to the Editorial Office at Tuhinga@tepapa.govt.nz.


Data Publishing Guidelines

We strongly encourage and support various strategies and methods for data publication. The preferable way is to store data in internationally recognised data repositories and link back to the data set(s) in the respective article. Data can also be published as supplementary files to the articles, however this should be an exception rather than a rule (see How to publish data). The key to discover, use and cite your data is to include the data references in the reference lists of the articles and always include the DOIs of the data sets, when available, in the citation record. You may read more about this in How to cite data section of the article below. A good example of concise data citation guidelines using DOIs is also available on the GBIF website and on other data repositories.

Darwin Core-structured species occurrence records and observations (primary biodiversity data) should be published with GBIF using either the Integrated Publishing Toolkit (IPT) (for which Pensoft maintains an instance, in case such is not available to the authors).  Alternatively, DwC data could also be published in trusted and community-recognised repositories (for example, Atlas of Living Australia, Symbiota,  Arctos or others), however deposition at GBIF should always have a priority over the alternatives. In case a dataset is deposited in more than one repository, the data paper should link to the dataset which is actually described, again with GBIF having a priority over the others.

Authors who want to publish species occurrence data as supplementary files only or through generic repositories (e.g. Zenodo, Dryad), instead of submitting these to GBIF, should justify their decision to do so in a letter to the editors.

For biodiversity and biodiversity-related data the reader may consult the Strategies and guidelines for scholarly publishing of biodiversity data (Penev et al. 2017, Research Ideas and Outcomes 3: e12431. https://doi.org/10.3897/rio.3.e12431). For reader's convenience, we list here the hyperlinked table of contents of these extensive guidelines:

The core of the data publishing project of Pensoft is the concept of "Data Paper" developed in a cooperation with the Global Biodiversity Information Facility (GBIF). Data Papers are peer-reviewed scholarly publications that describe the published datasets and provide an opportunity to data authors to receive the academic credit for their efforts. Currently, Pensoft offers the opportunity to publish Data Papers describing occurrence data and checklists, Barcode-of-Life genome data and biodiversity-related software tools, such as interactive keys and others.

Examples of data papers

ZooKeys:
Antarctic, Sub-Antarctic and cold temperate echinoid database
A dataset from bottom trawl survey around Taiwan
Project Description: DNA Barcodes of Bird Species in the National Museum of Natural History, Smithsonian Institution, USA
Literature based species occurrence data of birds of northeast India
MOSCHweb — a matrix-based interactive key to the genera of the Palaearctic Tachinidae (Insecta, Diptera)
Amundsen Sea Mollusca from the BIOPEARL II expedition
Iberian Odonata distribution: data of the BOS Arthropod Collection (University of Oviedo, Spain
FORMIDABEL: The Belgian Ants Database
Circumpolar dataset of sequenced specimens of Promachocrinus kerguelensis (Echinodermata, Crinoidea)

PhytoKeys:
Florabank1: a grid-based database on vascular plant distribution in the northern part of Belgium (Flanders and the Brussels Capital region)
Database of Vascular Plants of Canada (VASCAN): a community contributed taxonomic checklist of all vascular plants of Canada, Saint Pierre and Miquelon, and Greenland
Herbarium of Vascular Plants Collection of the University of Extremadura (Spain)

Nature Conservation:
Antarctic macrobenthic communities: A compilation of circumpolar information

Press releases on data papers
New incentive for biodiversity data publishing
Data publishing policies and guidelines for biodiversity data by Pensoft
First database-derived 'data paper' published in journal
A new type of data papers designed to publish online interactive keys
Data paper describes Antarctic biodiversity data gathered by 90 expeditions since 1956
Unique information on Belgian ants compiled and published through FORMIDABEL data paper
Database simplifies finding Canadian plant names and distribution
A synthesis of the 36451 specimens from the UNEX Herbarium in a new data paper


Data Quality Checklist and Recommendations

INTRODUCTION

An empowering aspect of digital data is that they can be merged, reformatted and reused for new, imaginative uses that are more than the sum of their parts. However, this is only possible if data are well curated. To help authors avoid some common mistakes we have created this document to highlight those aspects of data that should be checked before publication.

By "mistakes" we do not mean errors of fact, although these should also be avoided! It is possible to have entirely correct digital data that are low-quality because they are badly structured or formatted, and, therefore, hard or impossible to move from one digital application to another. The next reader of your digital data is likely to be a computer program, not a human. It is essential that your data are structured and formatted so that they are easily processed by that program, and by other programs in the pipeline between you and the next human user of your data.

The following list of recommendations will help you maximise the re-usability of your digital data. Each represents a test carried out by Pensoft when auditing a digital dataset at the request of an author. Following the list, we provide explanations and examples of each recommendation.

Authors are encouraged to perform these checks themselves prior to data publication. For text data, a good text editor (https://en.wikipedia.org/wiki/List_of_text_editors) can be used to find and correct most problems. Spreadsheets usually have some functions for text checking functions, e.g. the "TRIM" function that removes unneeded whitespace from a data item. The most powerful text-checking tools are on the command line, and the website "A Data Cleaner's Cookbook" (https://www.datafix.com.au/cookbook/) is recommended for authors who can use a BASH shell.

When auditing datasets for authors, Pensoft does not check taxonomic or bibliographic details for correctness, but we will do basic geochecks upon request, e.g. test to see if the stated locality is actually at or near the stated latitude/longitude. We also recommend checking that fields do not show "domain schizophrenia", i.e. fields misused to containing data of more than one type.

Proofreading data takes at least as much time and skill as proofreading text. Just as with text, mistakes easily creep into data files unless the files are carefully checked. To avoid the embarrassment of publishing data with such mistakes, we strongly recommend that you take the time to run these basic tests on your data.


CHECKLIST

Characters

  • The dataset is UTF-8 encoded
  • The only characters used that are not numbers, letters or standard punctuation, are tabs and whitespaces
  • Each character has only one encoding in the dataset
  • No line breaks within data items
  • No field-separating character within data items (tab-separated data preferred)
  • No "?" or replacement characters in place of valid characters
  • No Windows carriage returns
  • No leading, trailing, duplicated or unnecessary whitespaces in individual data items

Records

  • No broken records, i.e. records with too few or too many fields
  • No blank records
  • No duplicate records (as defined by context)

Fields

  • No empty fields
  • No evident truncation of data items
  • No unmatched braces within data items
  • No data items with values that are evidently invalid or inappropriate for the given field
  • Repeated data items are consistently formatted
  • Standard data items such as dates and latitude/longitude are consistently formatted
  • No evident disagreement between fields
  • No unexpectedly missing data

RECOMMENDATIONS

Characters 

  • The dataset is UTF-8 encoded

Computer programs do not "read" characters like "A" and "4". Instead, they read strings of 0's and 1's and interpret these strings as characters according to an encoding scheme. The most universal encoding scheme is called UTF-8 and is based on the character set called Unicode. Text data should always be shared with UTF-8 encoding, as errors can be generated when non-UTF-8 encodings (such as Windows-1252) are read by a program expecting UTF-8, and vice-versa. (See also below, on replacement characters). 

  • The only characters used that are not numbers, letters or standard punctuation are tabs and whitespaces

Unusual characters sometimes appear in datasets, especially when databases have been merged. These "control" or "gremlin" characters are sometimes invisible when data are viewed within a particular application (such as a spreadsheet or a database browser) but can usually be revealed when the data are displayed in a text editor. Examples include vertical tab, soft hyphen, non-breaking space and various ASCII control characters (https://en.wikipedia.org/wiki/Control_character).

  • Each character has only one encoding in the dataset

We have seen individual datasets in which the degree symbol (°) is represented in three different ways, and in which a single quotation mark (') is also represented as a prime symbol, a right single quotation mark and a grave accent. Always use one form of each character, and preferably the simplest form, e.g. plain quotes rather than curly quotes.

  • No line breaks within data items

Spreadsheet and database programs often allow users to have more than one line of text within a data item, separated by linebreaks or carriage returns. When these records are processed, many computer programs understand the embedded linebreak as the end of a record, so that the record is processed as several incomplete records:

item A  itemB1          itemC

               itemB2

becomes:

itemA           itemB1

itemB2          itemC

  • No field-separating character within data items (tab-separated data preferred)

Data are most often compiled in table form, with a particular character used to separate one field ("column") from the next. Depending on the computer program used, the field-separating character might be a comma (CSV files), a tab (TSV files), a semicolon, a pipe (|) etc.

Well-structured data keeps the field-separating character out of data items, to avoid confusion in processing. Because commas are commonly present within data items, and because not all programs understand how to process CSVs, we recommend using tabs as field-separating characters (and avoiding tabs within data items!): https://en.wikipedia.org/wiki/Tab-separated_values.

  • No "?" or replacement characters in place of valid characters

When text data are moved between different character encodings, certain characters can be lost because the receiving program does not understand what the sending program is referring to. In most cases, the lost character is then represented by a question mark, as in "Duméril" becoming "Dum?ril", or by a replacement character, usually a dark polygon with a white question mark inside.

It is important to check for these replacements before publishing data, especially if you converted your data to UTF-8 encoding from another encoding.

  • No Windows carriage returns

On UNIX, Linux and Mac computers, a linebreak is built with just one character, the UNIX linefeed '\n' ('LF'). On Windows computers, a linebreak is created using two characters, one after the other: '\r\n' ('CRLF'), where '\r' is called a 'carriage return' ('CR'). Carriage returns are not necessary in digital data and can cause problems in data processing on non-Windows computers. Check the documentation of the program in which you are compiling data to learn how to remove Windows carriage returns.

  • No leading, trailing, duplicated or unnecessary whitespaces in individual data items

Like "control" and "gremlin" characters, whitespaces are invisible and we pay little attention to them when reading a line of text. Computer programs, however, see whitespaces as characters with the same importance as "A" and "4". For this reason, the following four lines are different and should be edited to make them the same:

Aus bus (Smith, 1900)

   Aus bus (Smith, 1900)

Aus bus (Smith,   1900)

Aus  bus   (Smith, 1900  )

 Records

  • No broken records, i.e. records with too few or too many fields

If a data table contains records with, for example, 25 fields, then every record in the table should have exactly 25 data items, even if those items are empty. Records with too few fields are often the result of a linebreak or field separator within a data item (see above). Records with too many fields also sometimes appear when part of a record has been moved in a spreadsheet past the end of the table.

  • No blank records

Blank records contribute nothing to a data table because they contain no information, and a tidy data table has no blank lines. Note, however, that a computer program looking for blank lines may not find what looks to a human like a blank line, because the "blank" line actually contains invisible tabs or whitespaces.

  • No duplicate records (as defined by context)

It can be difficult to find duplicate records in some datasets, but our experience is that they are not uncommon. One cause of duplicates is database software assigning a unique ID number to the same line of data more than once. Context will determine whether one record is a duplicate of another, and data compilers are best qualified to look for them.

 Fields

  • No empty fields

 Fields containing no data items do not add anything to the information content of a dataset and should be omitted.

  •  No evident truncation of data items

The end of a data item is sometimes cut off, for example when a data item with 55 characters is entered into a database field with a 50-character maximum limit. Truncated data items should be repaired when found, e.g.

Smith & Jones in Smith, Jones and Bro

repaired to:

Smith & Jones in Smith, Jones and Brown, 1974

  • No unmatched braces within data items

These are surprisingly common in datasets and are either data entry errors or truncations, e.g.

Smith, A. (1900 A new species of Aus. Zool. Anz. 23: 660-667.

5 km W of Traralgon (Vic

  • No data items with values that are evidently invalid or inappropriate for the given field

For example, a field labelled "Year" and containing years should not contain the data item "3 males".

  •  Repeated data items are consistently formatted

The same data item should not vary in format within a single dataset, e.g.

Smith, A. (1900) A new species of Aus. Zool. Anz. 23: 660-667.

Smith, A. 1900. A new species of Aus. Zoologischer Anzeiger 23: 660-667.

Smith, A. (1900) A new species of Aus. Zool. Anz. 23, 660-667, pl. ix.

  • Standard data items such as dates and latitude/longitude are consistently formatted

Data compilers have a number of choices when formatting standard data items, but whichever format is chosen, it should be used consistently. A single date field should not, for example, have dates represented as 2005-05-17, May 19, 2005 and 23.v.2005.

  • No evident disagreement between fields

If there are fields which contain linked information then these fields should be checked to ensure that they do not conflict with each other. For example, the year or an observation cannot be after the year it was published. Examples:

Year            Citation

1968            Smith, A. (1966) Polychaete anatomy. Academic Press, New York; 396 pp.

 

Genus           Subgenus

Aus             Bus (Aus)

  • No unexpectedly missing data

This is a rare issue in datasets that have been audited, but occasionally occurs. An example is the Darwin Core "verbatimLocality" field for a record containing a full latitude and longitude, but with the "decimalLatitude" and "decimalLongitude" fields blank.

  • Spelling of Darwin Core terms

Darwin Core terms are usually considered case sensitive, therefore you should use their correct spelling (http://rs.tdwg.org/dwc/).

We thank Dr. Robert Mesibov for preparing the Data Quality Checklist draft and Dr. Quentin Groom for reviewing it.


Guidelines for Editors


How to Access a Manuscript

Manuscripts can be accessed after login

  1. Login is possible after registration at the journal's website. Our Editorial Office will register all first-time editors and reviewers. New users will receive an automated notification with a request to confirm registration and account information, and options for setting a password, email alerts and other features.  
    Note: All users can use their registration details to login in all three (Book, E-Book and the respective Journal) platforms of www.pensoft.net.
    Note: Please remember that you may have registered with two or more different email addresses, that is why you may have more than one valid account at www.pensoft.net. We advise using only one email address, hence one password associated with it, for all your operations at www.pensoft.net. We highly recommend that in case the user has two or more different accounts, to merge these through the user's profile.

Note: The users can at any time change the initially set password and correct personal details using their user's profile menu (by clicking on the user's name in the upper right corner of the screen appearing after login).

  1. If you have forgotten your password, please use the function Forgot your password? or write to request it from journals@pensoft.net.

There are two ways to access a manuscript

  1. After login, please go to the respective journal’s web page and click on My Tasks button in the upper right corner of the screen. This way, you will be able to see all manuscripts you are responsible for as an author or reviewer or editor.

    Note: The manuscripts are grouped by categories, e.g., In Review (no.), In layout (no.), Published (no.), and Archived (no.) etc. The number in brackets after each category shows the number of manuscripts that were assigned to you.

  2. Click on the active manuscript link provided in the email notification you have received from the online editorial system. The link will lead you directly to the manuscript.


General Responsibilities of Editors

Subject, or Associate, editors carry the main responsibility for the scientific quality of the papers. They take the final decision on a manuscript’s acceptance or rejection and their names are listed as Academic Editor in the header of each published article.

The editorial process is facilitated through an online editorial system and a set of email notifications. The online editorial system informs the Subject Editor about any change in the status of a manuscript from submission to publication.

The online editorial system is designed to save time and effort for Subject Editors in checking the status of the manuscripts. There is no need for editors to visit the journal’s website to keep track on the manuscript they are responsible for. The online system will inform the Subject Editor when an invited reviewer has accepted or declined to review. The email notifications contain stepwise instructions what action is needed at each stage, as well as a link to the respective manuscript (accessible by clicking on the link in the email notification or after login – see How to Access a Manuscript).

Subject Editors are not expected to provide a thorough linguistic editing or copyediting of a manuscript, but rather focus on its scientific quality and overall style, which should correspond to good practices in clear and concise academic writing. It is the author’s responsibility to submit the manuscript in linguistically and grammatically correct English. The Subject Editor should not hesitate to recommend either Reject, or Reject, but resubmission encouraged PRIOR to the peer-review process, in cases when a manuscript is scientifically poor and/or does not conform to journal’s style, and/or is written in poor English (see Note under point 1 below how to reject a manuscript prior to peer review). 

It often happens that even carefully written manuscripts may contain small errors in orthography or stylistics. We shall be thankful if editors spot such errors during the reading process and correct them.


Stepwise Description of the Editorial Process

  1. Once a manuscript is submitted, the Managing Editor (or the Editor-in-Chief) briefly checks if the manuscript conforms with the journal's Focus, Scope, Policies and style requirements and decides whether it is potentially suitable for publication and can be processed for review, or rejected immediately, or returned to the author for improvement and re-submission.
    Note: There are two ways to reject/return a manuscript prior to review process:
    - Through the buttons Reject or Return to the author for correction in the Editorial tab. Please note, however, that the buttons will be made active only after a justification for the rejection or return is provided in the text field.
    - Through an email to the Editorial office explaining the reason for rejection or return. The manuscript will be then rejected/returned through the online editorial system and the respective notification email will be sent from the Editorial Office.
  2. At this stage, the Managing Editor (or the Editor-in-Chief) can also check the manuscript for plagiarism via the iThenticate service by clicking on the "ïTehnticate report" button. Journals providing a peer review in languages other than English (for example Russian) may use other plagiarsim checking services (for example Antiplagiat).
  3. When a manuscript is suitable, the Managing Editor (or the Editor-in-Chief) assigns it to the Subject Editor responsible for the respective topic (e.g., science branch or taxon). The Subject Editor receives a notification email on the assignment.
    Note: The link to the respective manuscript is available in the review request email and all consequent reminder emails. The manuscript is accessible by clicking on the link in the email notifications, or via the user's dashboard after login. Please see How to Access a Manuscript above in case you have any difficulties.
  4. The assigned Subject Editor next reads the manuscript to decide whether it is potentially suitable for publication and can be processed for review, or rejected immediately, or returned to the author for improvement and re-submission. Reasons for rejection can be a low scientific quality, non-conformance to the journal’s style/policies, and/or linguistically or grammatically poor English language.
    Note: There are two ways to reject a manuscript prior to review process:
    -  Through the buttons Reject or Reject, but re-submission encouraged in the Editorial tab. Please note, however, that the buttons become active only after a justification for the rejection is provided in the text field. 
    -  Through an email to the Editorial office explaining the reason for rejection. The manuscript will be then rejected/returned through the online editorial system and the respective notification email will be sent from the Editorial Office.
  5. In case the manuscript is acceptable for peer review, the Subject Editor has to invite reviewers by clicking on the Invite reviewers link. The Subject Editor can select from a list of reviewers, starting with the ones suggested by the authors during the submission process, and followed by the reviewers who are already listed in the database, or add new reviewers.
  6. Once reviewers are chosen, the Subject Editor has to click the Invite reviewers green button at the end of the page which will generate email templates with review invitations. It is highly recommended that the Subject Editor adds some personal words above the standard email text of the review invitation.
  7. In case a reviewer is absent from our users' data base, the Subject Editor can add his/her name and email through the Add new reviewer link, which will appear once the search field reveal no results. It is possible that the needed reviewer has already been registered in the users database either as customer or author/reviewer of another journal. If this is the case, then his/her name, affiliation and other metadata will automatically appear once the e-mail field is populated in the Create user online form.
  8. The Subject Editor receives a notification email when the Reviewer agrees or declines to review. The Subject Editor takes care to appoint additional reviewers in case some of the invited reviewers decline.
  9. Once all Reviewers submit their reviews, the Subject Editor receives an email notification, inviting him/her to consider Reviewers' opinions, read through the manuscript and take a decision through the Proceed button.
    Note: Editorial comments can be added in the online editorial form; comments and corrections are expected to be added also in the manuscript file (either on the PDF version or in the text file), that should be uploaded during finalization of the editorial decision process. 
  10. At this stage, the editor should take a decision either to (1) accept the manuscript, (2) reject it, (3) recommend Major or Minor Revisions or reject it, or open a second review round. In case the manuscript is not rejected, but recommended for Minor Revision, Major Revision, or Acceptance, the author is expected to submit a revised version within a certain period of time (and the Subject Editor will be notified by email about that).
    Note 1: Authors must submit revised versions as a text file using Track Changes/Comments tools of Word so that the Subject Editor can see their corrections/additions. Authors must reply to the essential critiques and comments of reviewers separately through the online editorial system.
    Note 2: During the second, or next, review round, the Subject Editor may decide to ask reviewers to evaluate the revised version of the manuscript. He/she may also make a decision based on the author’s responses and the revised version of the manuscript without asking additional Reviewers' support.
  11. After acceptance, the manuscript will go to proofreading and layout. The Subject Editor will be notified by email when the final proof is uploaded on the journal’s website. The Subject Editor is expected to look at the proofs and notify the Editorial Office through email in case the proofs need improvement.
  12. The Subject Editor may always access information on the manuscripts which have been edited by him/her through the menu My Tasks –> Subject Editor on the journal’s web page – In Review (no.), In Edit (no.), Published (no.), and Archived (no.). The number in brackets after each category shows the number of manuscripts that were assigned.

Editors’ and Reviewers’ Workload Stats

While selecting a Reviewer or a Subject Editor to assign to a manuscript, Editors can access the current and past workload for the person they are considering.

By clicking on the user’s name, an Editor sees how many editorial or review tasks the person is currently assigned with, as well as a record of the user’s previous performance across all ARPHA-hosted journals (i.e. number of accepted and declined editorial and review assignments, as well as the titles of the corresponding journals).

The feature is meant to facilitate and expedite the editorial process by discouraging assignment of tasks to overburdened or inactive users.

Find how to Manage Subject editor assignments and Invite Reviewers in the ARPHA Manual.


Review Quality Rating

Subject Editors should evaluate each review submitted to a manuscript they are handling by using a 5-star rating system. The average score is visible for Subject editors who consider the user as a Reviewer. The feature is meant to expedite the editorial process by aiding Subject Editors in the selection of the most suitable reviewers.

Find how to Rate a peer review in the ARPHA Manual.


Guidelines for Reviewers

We support the open science approach in the peer review and publication process. We encourage our reviewers to open their identity to the authors and consider supporting the peer review oaths, which tend to be short declarations that reviewers make at the start of their written comments, typically dictating the terms by which they will conduct their reviews (see Aleksic et al. 2015, doi: 10.12688/f1000research.5686.2 for more details):

Principles of the open peer-review oath

  • Principle 1: I will sign my name to my review
  • Principle 2: I will review with integrity
  • Principle 3: I will treat the review as a discourse with you; in particular, I will provide constructive criticism
  • Principle 4: I will be an ambassador for the practice of open science

How to Access a Manuscript

Manuscripts can be accessed after login

  1. Login is possible after registration at the journal's website. Our Editorial Office will register all first-time editors and reviewers. New users will receive an automated notification with a request to confirm registration and account information, and options for setting a password, email alerts and other features.  
    Note: All users can use their registration details to login in all three (Book, E-Book and the respective Journal) platforms of www.pensoft.net.
    Note: Please remember that you may have registered with two or more different email addresses, that is why you may have more than one valid account at www.pensoft.net. We advise using only one email address, hence one password associated with it, for all your operations at www.pensoft.net. We highly recommend that, in case the user has two or more different accounts, to merge these through user's profile.  
    Note: Users can at any time change the initially set password and correct personal details using their user's profile menu (by clicking on the user's name in the upper right corner of the screen appearing after login).
  2. If you have forgotten your password, please use the function Forgot your password? or write to request it from journals@pensoft.net.

There are two ways to access a manuscript

  1. After login, please go to the respective journal’s web page and click on My Tasks button in the upper right corner of the screen. This way, you will be able to see all manuscripts you are responsible for as Author or Reviewer or Subject Editor.

    Note: The manuscripts are grouped by categories, e.g., In Review (no.), In layout (no.), Published (no.), and Archived (no.) etc. The number in brackets after each category shows the number of manuscripts assigned to you.

  2. Click on the active manuscript link provided in the email notification you have received from the online editorial system. The link will lead you directly to the manuscript.


General Responsibilities of Reviewers

This journal uses a single-blind peer review process. The reviewers are encouraged to disclose their identity, if they wish so. The peer review and editorial process is facilitated through an online editorial system and a set of email notifications. The online editorial system sends the Reviewer a review request, initiated by the Subject Editor or the Editorial Office. The online system will also inform about delays in the reviewing and will confirm a successful review submission. The email notifications contain stepwise instructions about the actions needed at each stage along with the link to the respective manuscript (accessible only after login – see section How to Access a Manuscript).

Reviewers are not expected to provide a thorough linguistic editing or copyediting of a manuscript, but rather focus on its scientific quality and overall style, which should correspond to the good practices in clear and concise academic writing. If Reviewers recognize that a manuscript requires linguistic edits, we shall be grateful for them to inform both the Author and the Subject Editor in the report. It is the Author’s responsibility to submit the manuscript in linguistically and grammatically correct English.

It often happens that even carefully written manuscripts may contain small errors in orthography or stylistics. We shall be thankful if Reviewers spot such errors during the reading process and correct them.

The manuscripts will generally be reviewed by two or three experts with the aim of reaching a first decision as soon as possible. Reviewers do not need to sign their reports, but are welcome to do so. They are also asked to declare any conflicts of interest.

Reviewers are asked whether the manuscript is scientifically sound and coherent, how interesting it is and whether the quality of the writing is acceptable. Where possible, the final decision is made on the basis of the peer reviews. In cases of strong disagreement between the reports or between the authors and peer reviewers, the editor can assess these according to his/her expertise or seek advice from a member of the journal's Editorial Board.

The ultimate responsibility for editorial decisions lies with the respective Subject Editor and/or, in some journals, with the Editor-in-Chief. All appeals should be directed to the Editor-in-Chief, who may decide to seek advice from the Subject Editors or the Editorial Board.

Reviewers are also asked to indicate which articles they consider to be especially interesting or significant. These articles may be given greater prominence and greater external publicity, including press releases addressed to science journalists and mass media.

During a second review round, reviewers may be asked to evaluate the revised version against their recommendations submitted during the first review round.

Reviewers are kindly asked to be polite and constructive in their reports. Reports that may be insulting or uninformative will be rescinded.

Reviewers are asked to start their report with a very brief summary of the reviewed paper. This will help the editor and the authors see whether the reviewer correctly understood the paper or whether a report might be based on misunderstanding.

Furthermore, reviewers are also asked to comment on originality, structure and previous research:

Originality: Is the paper sufficiently novel and does it contribute to a better understanding of the topic under scrutiny? Is the work rather confirmatory and repetitive?

Structure: Is the introduction clear and concise? Does it place the work into the context that is necessary for a reader to comprehend aims, hypotheses tested, experimental design or methods? Are Material and Methods clearly described and sufficiently explained? Are reasons given when choosing one method over another one from a set of comparable methods? Are the results clearly, but concisely described? Do they relate to the topic outlined in the introduction? Do they follow a logical sequence? Does the discussion place the paper in scientific context and go a step beyond the current scientific knowledge on the basis of the results? Are competing hypotheses or theories reasonably related to each other and properly discussed? Do the conclusions seem reasonable?

Previous research: Is previous research adequately incorporated into the paper? Are references complete, necessary and accurate? Is there any sign that substantial parts of the paper are copies of other works?


Stepwise Description of the Peer Review Process

  1. This journal uses a single-blind peer review process. Notwithstanding with that, the Reviewers are encouraged to disclose their identities, if they wish to do so. 

  2. The Reviewer receives a review request generated by the Subject Editor or the Editorial Office and is expected to either agree to provide a review, or decline, through pressing the Will do the review or Unable to do the review link in the online editorial system. In case the Reviewer agrees to review the manuscript, he/she should submit the review within a certain time frame, which may vary in the different journals.
    Note: The link to the respective manuscript is available in the review request email and all consequent reminder emails. The manuscript is accessible by clicking on the link in the email notification, or after login. Please look at the section How to Access a Manuscript above in case you have any difficulties.

  3. The review should be submitted through the Proceed button. The review should consist of:

  • a simple online questionnaire to be answered by ticking either Yes, No, or N/A;
  • comments addressed to the Author and the Subject Editor in the online form;
  • associated files (corrected/commented manuscript file, review submitted in a separate text file, etc.), if any.

Note: Reviewers can insert corrections and comments in the manuscript review version (PDF) and/or in the manuscript text file (usually Microsoft Word, rarely Open Office file). When working in the PDF, please use either the Text Edits or the Sticky Notes tools (available through the menu Tools -> Comments & Markup of the Acrobat Reader). When editing in Microsoft Word please use the Track Changes / Comments tools.
Note: Associated files should be submitted at the end of the review process by clicking on the Browse button, then selecting the respective file on your computer, and then pressing the Upload button. A Reviewer may upload as many files to support his/her review as needed.

  1. The Reviewer may decide to stay anonymous or open his/her identity by ticking the Show my name to the author(s) box at the bottom of the reviewer’s form. Please be aware that your identity might be revealed in the comments or in Track Changes corrections of the Microsoft Word or PDF file you correct. Therefore, please make sure that you delete your name and initials in the Options section of your Word or PDF processor if you want to remain anonymous.

  2. In addition to the above, by checking a box at the bottom of the submission form, reviewers may opt for making their contribution public in the event that the article is accepted and published. The reviewer's name, affiliation and email address will be displayed next to those of the Academic editor (or Subject editor) on the article webpage.

  3. The review process is completed by selecting a recommendation from five options: (1) Reject; (2) Reject, but resubmission encouraged; (3) Major Revision; (4) Minor Revision; (5) Accept. The system will ask for one more confirmation of the selected recommendation before submission. The submitted review cannot be changed after submission.
    Note: Reasons for rejection can be a low scientific quality, non-conformance to the journal’s style/policies, and/or grammatically poor English language.
    Note: It is also possible for review and associated files (e.g., a corrected manuscript file) to be sent as attached files to the email of the Editorial Office. We strongly recommend avoiding this option, and instead uploading reviews through the online editorial management system.

  4. Once a Reviewer submits a review of a manuscript, he/she receives an acknowledgement email from the journal.

  5. The submission of the review is also automatically reported to Clarivate - Web of Science Reviewer Recognition Service (formerly Publons). Reviewers are asked to confirm whether they want their reviews to be recorded on Clarivate.

  6. When all Reviewers have submitted their reviews, the Subject Editor makes a decision to either accept, reject or request further minor/major revision.

  7. After the Subject Editor's decision, the manuscript is sent back to the author for comments and further revision. The Author needs to submit a revised version in due time.

  8. Reviewers are notified via email when the revised version of a manuscript that they have reviewed is submitted by the Author. They receive a link to the revised version along with the editorial decision and all reviews of the manuscript. Reviewers are also provided with a feedback form should they have any comments on the revised version. 

  9. When an article is published, all Reviewers who have provided a review for the respective manuscript receive an email acknowledgment. In the email, there is a link to view/download the published article.

  10. The Reviewer may always access information on the manuscripts that are being / have been reviewed by him/her through the menu My Tasks –> Reviewer on the journal’s web page – In Review (no.), In Edit (no.), Published (no.), and Archived (no.). The number in brackets after each category shows the number of manuscripts that have been assigned to you.


Article Processing Charges

Tuhinga has no article processing charges, as publication costs are covered by the Museum of New Zealand Te Papa Tongarewa. However, if your manuscript would exceed the word and page limits of articles (see Instructions to Authors section above), please contact the editorial team prior to submission, as this may incur additional costs.

Some additional services can be provided at the authors' expense, such as linguistic revision and PR campaigns. Those are entirely optional. Please refer to the section below for more detail.


Additional Services (Optional)

Optional service

Price

Notes

Linguistic services

€ 18 per 1800 characters

For texts that require additional English language editing

Tailored PR campaign

€ 150*

Press release, dedicated media and social networks promotion

Scientific illustrations & image processing to complement articlesask for a quote contacting Pensoft Publishers at designer@pensoft.netOn demand

*This service can be discounted or waived for articles of outstanding importance for the science and society.


Please note that the above prices do not include VAT (Value Added Tax). VAT is applicable only for VAT NON-registered customers based within the European Union.


Science Communication

Our journal and the PR team at Pensoft invites authors to contribute to the communication and promotion of their published research, thereby increasing the visibility, outreach and impact of their work. 

Authors are welcome to notify us whenever their institution is working on a promotional campaign about their work published in our journal. We are always happy to reshare and/or repost (where appropriate). 

You can contact our PR team at dissemination@pensoft.net to discuss the communication and promotion of your research.


Tailored PR Campaign

(Paid service*)

We encourage authors, who feel that their work is of particular interest to the wider audience, to email us with a press release draft** (see template and guidelines), outlining the key findings from the study and their public impact. Then, the PR team will work with them to finalise the announcement that will be:

  • Issued on the global science news service Eurekalert!
  • Sent out to our media contacts from the world’s top-tier news outlets
  • Posted on ARPHA’s or Pensoft’s blog
  • Shared on social media via suitable ARPHA-managed accounts

Following the distribution of the press announcement, our team will be tracking the publicity across news media, blogs and social networks, in order to report back to the author(s), and reshare any prominent media content.

Request our Tailored PR campaign service by selecting it while completing your submission form and you will be contacted once your manuscript is accepted for publication. Alternatively, contact our PR team  (dissemination@pensoft.net), preferably upon the acceptance of your manuscript.

* The Tailored PR campaign is an additional service charged extra. However, we would consider discounts and even full waivers for studies of particular interest for the society.

** Please note that our PR team reserves the right to edit your press release at their discretion. No press announcements will be issued until we receive the author’s final approval to do so. The service is only available for studies published within the past 3 months.


Guest Blog Post

(Free service)

Authors are strongly encouraged to promote their work and its impact on society to the audience beyond their immediate public of fellow scientists by means of storytelling in plain language. Ideally, such guest blog posts will be:

  • Written from the author’s own point of view, using conversational tone;
  • Written in fluent English;
  • Presenting some curious background information, in order to place the discovery in context;
  • Including attractive non-copyright imagery.

Request our Guest blog post service by contacting the PR department (dissemination@pensoft.net), regardless of the status of your submission, as there are no time constraints for guest blog post publication. Particularly encouraged are follow-up contributions telling the story of, for example, a research paper that has led to an important policy to be set in place; or an article that has met remarkable attention or reactions in the public sphere.

Following the necessary final touches to the guest blog post by the PR team, the contribution will be:

  • Posted on ARPHA’s or Pensoft’s blog
  • Shared on social media via multiple and relevant ARPHA-managed accounts

Please note that the PR team reserves the right to refuse publication of a guest blog post on the occasion that it is provided in poor English, uses considerable amount of jargon or does not abide by basic ethical standards. Our PR team reserves the right to request changes to the text related to formatting or language. No blog posts will be issued until we receive the author’s final approval to do so.

Find past guest blog posts on Pensoft’s blog here


Video Podcast

(Free service)

To efficiently increase the outreach of their research, authors are suggested to prepare a video contribution (i.e. elevator video pitch, video abstract or topical video), where they present their work to an audience beyond their immediate public of fellow scientists by means of visual storytelling.

To do so, they are expected to send us a short (up to 02’00’’) video clip, presenting their study in a nutshell, in order to spark the viewer’s further interest in their findings and work, as well as the research topic as a whole. Ideally, such contribution will be:

  • filmed in high quality, preferably with .mp4 file extension with the H.264 video codec;
  • directed from the author’s own point of view, using conversational tone and minimal jargon;
  • presented in fluent English or featuring English subtitles;
  • accompanied by a transcript in English;
  • accompanied by a short text introduction for the purposes of a blog post.

Request our Guest video contribution service by contacting the PR department (dissemination@pensoft.net), regardless of the status of your submission, since there are no time constraints for guest blog post publication.

Following the necessary final touches to the guest blog post, the contribution will be:

  • Shared on Pensoft’s YouTube channel;
  • Posted on ARPHA’s or Pensoft’s blog;
  • Shared on social media via multiple and relevant ARPHA-managed accounts. 

Please note that the PR team reserves the right to refuse distribution of a guest contribution on the occasion that it is provided in poor English, uses considerable amount of jargon or does not abide by basic ethical standards.


Custom Social Media Content

(Free service)

To help increase the visibility and outreach of their research, authors are welcome to suggest custom social media content to be distributed via suitable Pensoft- and ARPHA-managed social media accounts.

Social media posts are expected to:

  • Be limited to two short sentences or 280 characters (including links);
  • Be written in a conversational tone;
  • Contain minimal jargon;
  • Include the DOI link of the article;
  • Not duplicate the title or abstract of the article;
  • Include attractive non-copyright imagery;
  • Possibly include up to 10 social media accounts, e.g. co-authors (Twitter only), affiliations, funding bodies etc. relevant to the study.

Request our Custom social media content service by contacting our PR department (dissemination@pensoft.net).

Please note that our PR team reserves the right to edit your text at their discretion.


Journal Info

 

Journal Name Tuhinga
Journal URL https://tuhinga.arphahub.com/
ISSN (online) 2253-5861
ISSN (print) 1173-4337
Content Provider ARPHA
Publisher Te Papa Press
Journal Owner Te Papa Press
Owner URL https://www.tepapa.govt.nz/
Start Year 1995
Review Type single-blind
Publication Frequency continuous
APC No publication charges
License Creative Commons Attribution License (CC BY 4.0)

 


This website uses cookies in order to improve your web experience. Read our Cookies Policy

OK